Resistive Touch Panel Controller
Hardware Specifications
 
Power Requirements +5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple)
Operating Temperature 0 to 70 degrees Centigrade
Storage Temperature -40 to 80 degrees Centigrade
Relative Humidity 95% at 60 degrees Centigrade
Protocol 1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit
2. USB: USB 1.1 Low speed
3. PS/2: PS/2 mouse
 
 
Resolution 2048 x 2048
Accuracy Tolerance Max. +/- 0.5% tolerance
Report Rate 1. RS232: Max. 160 points/sec
2. USB: Max. 160 points/sec
3. PS2: Max. 140 points/sec
 
 
Response Time Max. 35 ms
Regulatory Approvals FCC-B, CE
   
   
   
   
Panel Resistance
4w 200 ~ 900 ohm (pin to pin on the same layer)
5w

50 ~ 200 ohm (pin to pin on the same layer, touch resistance under 2k ohm )

8w 200 ~ 900 ohm (pin to pin on the same layer)
 
 
Software Features ( TouchKit )
 
Calibration Fast Full oriental 4 points position
Compensation 1. Accuracy 25 points linearity position
2. Edge compensation
 
Draw Test Position and linearity verification
Controller Setting 1. Support multiple controllers
2. Dynamical add/ remove controllers
3. Change controller interface without reboot
 
 
Languages Support 11 languages for Windows
Mouse Emulator 1. Right/ left button emulation
2. Click/ drawing mode
 
Sound Notification 1. No sound
2. Touch down
3. Touch up
 
 
Double Click 1. Configurable double click speed
2. Configurable double click area
 
OS Support 1. Windows Vista / XP / 2000 / XP server 2003
  2. Windows 95 / 98 / ME / NT4 / XP Tablet PC edition
  3. Windows CE 2.12 / 3.0 / .net (4.0, 5.0, 6.0)
  4. Linux (up to Kernel 2.6)
  5. MS-DOS: support display resolution: 320x200, 640x200,
    640x350, 640x480, 800x600, 1024x768 and 1280x1024
  6. iMac 9.0 / OS X ( Power PC, Intel CPU )
  7. QNX
COM Port Support 1. Support COM1~COM255 for Windows and Linux
2. Support COM1~COM8 for DOS
 
Display Support 1. Support monitor/ display rotation
2. Support multiple monitors
3. Support split monitor
 
 
 
 
Model Pin-out Type Download Remark
4W
RS232
ETP_MB_4000RACG
Phase out
4W
USB
ETP_MB_4000UACG
5W
ELO
RS232
ETP_MB_5000RECG
Phase out
5w
USB
ETP_MB_5000UECG
5W
3M
RS232
ETP_MB_5000RMCG
Phase out
5W
USB ETP_MB_5000UMCG
get Adobe reader